We highly recommend measuring your rear seat to determine the best fit for your vehicle.
Regular Rear Seat Cover: 54” wide by 58” long (including hammock). Recommended for most cars, small trucks, and regular size SUVs. See dimensions diagram.
XL Rear Seat Cover: 60” wide by 64” long (including hammock). Specially designed to fit full size trucks and large SUVs (Cadillac Escalade, Chevrolet Suburban, Toyota Tundra, Ford F250, etc.). See dimensions diagram.
For more information see our Fit Guide here.
Yes! 4Knines® Rear Seat Covers have Velcro openings to allow access to side seat belts.
Note: middle seat belt is not accessible unless you purchase a Split Rear Seat Cover.
Yes! Our seat covers are LATCH compatible with Velcro openings for LATCH-equipped car seats.
Yes. The headrest straps were designed to be used with adjustable headrests. Some customers have used a carabiner clip or bungee cord to attach the straps, but this method is not recommended.
For general everyday cleaning, we recommend vacuuming or using a moist cloth to clean the surface. For a more thorough cleaning, remove seat cover from vehicle and hang over fence or clothesline, spray with a high pressure hose, and allow to air dry.
About machine washing: 4Knines® Rear Seat Covers are machine washable on gentle cycle using cold water only and air dried. We recommend machine washing as little as possible to preserve the waterproof coating. Our seat covers are very large and do not fit well in a home washing machine, so this is not the preferred method. Please avoid machines that have an agitator as this can damage the cover.
Our covers are made with colorfast fabric and should not damage your leather. As a precaution, if the cover gets wet, consider removing it from the vehicle and allow to air dry. The non-slip backing was designed to withstand summer temperatures in Arizona and has a working temperature up to 140 degrees Fahrenheit. We do not recommend leaving the cover in your vehicle on extremely hot days as the temperature can easily rise above that in an enclosed car.
The tubes work as anchors to help keep the seat cover in place. Simply slide the anchor into the crease between seat back and the seat bottom. See installation video for more information.
Our covers are available in black, tan, and grey.
Yes. Our seat covers are made from waterproof material. Small spills, snow, rain, and mud should be contained on the cover. However, seams and velcro openings are not waterproof, and liquid may seep through these areas.
The 4Knines® Lifetime Warranty covers the product for the reasonable lifetime of the seat cover as long as it has not been discontinued and was purchased directly from the owner of the 4Knines® brand. Proof of purchase or order number is required. The warranty covers manufacturing defects, defective hardware or materials (i.e. broken clips, headrest straps), irregular wear, or breakdown of the material. 4Knines® strives to provide superior customer service. If you have any problems with your product, please contact us and we will do whatever we can to make it right. (subject to change)
We stand behind our products 100%. If your 4Knines® product does not work for your vehicle for any reason, you may return it for a full refund within 30 days of purchase. No hassle. No explanation needed.